"Control Panel / Modems"
Settings for some Mobile Phones
Ericsson
Generic settings including:
ERICSSON 888, 320 phones
ERICSSON DI27, DI28 Infrared modems
Name - Ericsson
Speed - 57600
Connect - Infrared
Fax Class - Auto
__________________
Init (reset) - ATZ
Data - (blank)
Fax - (blank)
__________________
Flow - Hardware (RTS/CTS)
Terminal (DSR/DTR) [ ] not checked
Carrier (DCD) [ ] not checked
Type - Mobile
__________________
Note 1: With the 5mx/MC218 only &
R320 phone, the "Mobile Connectivity Update"
should be installed. This can be downloaded
from - [Mcu.zip]
Note 2: With the T20 phone and DI28 modem,
some users have found it necessary to use
a "Fixed line" setting instead of "Mobile"
to be able to connect.
ERICSSON T39
Name - Ericsson T39
Speed - 115200
Connect - Infrared
Fax Class - 2
__________________
Init (reset) - ATZ
Data - AT+CBST=7,0,1 (normal 9.6kbps GSM)
Data - AT+CBST=16,0,1 (28.8kbps HSCSD on Orange)
Fax - ATS0=2
__________________
Flow - Hardware (RTS/CTS)
Terminal (DSR/DTR) [X] checked
Carrier (DCD) [X] checked
Type - Mobile
__________________
Note: With the 5mx/MC218 only &
T39 phone, the "Mobile Connectivity Update"
should be installed. This can be downloaded
from - [Mcu.zip]
Note: There is a problem with "Fax" on this phone
which Ericsson are aware of, but have not yet
resolved. The line may drop during handshaking
with the remote modem.
[Top]
Siemens
SIEMENS S25 (but see alternative settings below)
SIEMENS C35 M35 S35
Name - Siemens
Speed - 57600 with IR; 19200 with Serial cable
Connect - Infrared (S25/S35); Serial (C35/M35)
Fax Class - Auto
__________________
Init (reset) - AT&F
Data - AT\Q1
Fax - (blank)
__________________
Flow - Software (Xon/Xoff)
Terminal (DSR/DTR) [ ] not checked
Carrier (DCD) [ ] not checked
Type - Mobile
Note: It is essential when connecting by Serial Cable
to use a Port speed of 19200. This also applies when
using the phone with a PC.
SIEMENS S25 (alternative settings)
Name - S25
Speed - 57600
Connect - Infrared
Fax Class - 1
__________________
Init (reset) - AT&F0X3\Q0
Data - (blank)
Fax - (blank)
__________________
Flow - Hardware (RTS/CTS)
Terminal (DSR/DTR) [X] checked
Carrier (DCD) [ ] not checked
Type - Fixed line (yes, despite being a mobile phone)
__________________
Note: With Modem type set as "Fixed line" sending and
receiving SMS messages with the Psion will not be
possible. Change the setting to "Mobile" temporarily to
use SMS.
SIEMENS
ME45/S45/SL45
[should also work with '55' series phones]
Name - ME45
Speed - 115200
Connect - Infrared
Fax Class - Auto
__________________
Init (reset) - ATZ
Data - (blank)
Fax - (blank)
__________________
Flow - Hardware (RTS/CTS)
Terminal (DSR/DTR) [X] checked
Carrier (DCD) [X] checked
Type - Mobile
[Top]
Nokia
NOKIA "Generic Settings"
including....7110, 8210, 8810, 8850, 6210
(see also settings below for 7110e at 14.4kbps
and for 6210e at up to 28.8kbps on Orange)
Name - Nokia
Speed - 57600
Connect - Infrared
Fax Class - Auto
__________________
Init (reset) - AT&F&K4
Data - (blank)
Fax - (blank)
__________________
Flow - Software (Xon/Xoff)
Terminal (DSR/DTR) [ ] not checked
Carrier (DCD) [ ] not checked
Type - Mobile
NOKIA 7110e running at 14.4kbps on Orange Network
Name - Nokia 7110e
Speed - 57600
Connect - Infrared
Fax Class - Auto
__________________
Init (reset) - AT&F&K4
Data - AT+CBST=14,0,1
Fax - (blank)
__________________
Flow - Software (Xon/Xoff)
Terminal (DSR/DTR) [ ] not checked
Carrier (DCD) [ ] not checked
Type - Mobile
Note: If the 7110e starts giving problems after a seemingly
trouble-free period of data access by IrDa, use Psion "Comms"
to connect to the 7110e, and type "ATZ <enter>" twice, followed
by "AT&F" <enter>" once.
NOKIA 6210e running at up to 28.8kbps on Orange Network
(these settings will "autobaud" and establish
the fastest connection speed possible)
Name - Nokia 6210e
Speed - 57600
Connect - Infrared
Fax Class - Auto
__________________
Init (reset) - AT&F&K4
Data - AT+CBST=0,0,1
Fax - (blank)
__________________
Flow - Software (Xon/Xoff)
Terminal (DSR/DTR) [ ] not checked
Carrier (DCD) [ ] not checked
Type - Mobile
NOKIA 6210e running at 28.8kbps on Orange Network
(these settings will "force" a 28.8 connection and,
if this cannot be achieved, will drop the line)
Name - Nokia 6210e
Speed - 115200
Connect - Infrared
Fax Class - Auto
__________________
Init (reset) - AT&F&K4
Data - ATS35=7+CBST=48,0,1
Fax - AT&S&K4
__________________
Flow - Software (Xon/Xoff)
Terminal (DSR/DTR) [ ] not checked
Carrier (DCD) [ ] not checked
Type - Mobile
NOKIA 6310i running at 28.8kbps on Orange Network
(these settings will "force" a 28.8 connection and,
if this cannot be achieved, will drop the line)
Name - Nokia 6310i
Speed - 115200
Connect - Infrared
Fax Class - Auto
__________________
Init (reset) - AT&F&K3
Data - AT+CBST=16,0,1
Fax – (blank)
__________________
Flow - Hardware (RTS/CTS)
Terminal (DSR/DTR) [ ] not checked
Carrier (DCD) [ ] not checked
Type - Mobile
NOKIA 6210 - HSCSD Settings
(General HSCSD settings using a V110 ISDN connection)
Modem settings for 28.8 kbps ISDN V.110
Name - Nokia 6210
Speed - 57600 bps
Connect via - Infrared
Fax class - Auto
__________________
Init (reset) - AT&F&K4+CBST=80
Data - (blank)
Fax - (blank)
__________________
Flow - Software (Xon/Xoff)
Terminal (DST/DTR) [X] checked
Carrier (DCD) [X] checked
Type - Mobile
[Top]
Motorola
Motorola L7089, P7389, T250
Name - Motorola
Speed - 115200
Connect - Infrared
Fax Class - Auto
__________________
Loudspeaker - Until call answered
Volume - Quiet
Pause time for "," - 4 secs
__________________
Init (reset) - AT&F&K5
Data - (blank)
Fax - (blank)
__________________
Flow - Software (Xon/Xoff)
Terminal (DSR/DTR) [ ] not checked
Carrier (DCD) [ ] not checked
Type - Mobile
Note: On the L7089 phone, make sure that
keypad tones are set to "On" and the "Normal"
setting. The settings in the "Options" tab
also seem to be important.(It has been suggested
that, as an alternative to having the keypad tones
enabled, connections will work if the Psion is
actively dialling *before* IR is enabled on the
phone. It may be a matter of "trial and error")
Note: Fax is not possible with a Psion and
the Motorola phone.
[Top]
General Note:
__________________
Fluorescent lights can interfere with IR communication
between the Psion and a mobile phone. Some users have found
that their Psion and phone work OK at home but won't work
in the office - this may be the reason.
__________________
If anyone reading this file is able to supply additional
settings, these would be greatly appreciated to keep the
information up to date.
[Top]
Mike McC
August 2002